Pinguino Forum
TFT touch screen - Printable Version

+- Pinguino Forum (http://forum.pinguino.cc)
+-- Forum: Hardware (http://forum.pinguino.cc/forumdisplay.php?fid=6)
+--- Forum: 8-bit (PIC18F) Pinguino (http://forum.pinguino.cc/forumdisplay.php?fid=42)
+---- Forum: Interfacing (http://forum.pinguino.cc/forumdisplay.php?fid=15)
+---- Thread: TFT touch screen (/showthread.php?tid=3871)



TFT touch screen - jacquot - 12-04-2013

Hi all

First of all I apologise for my bad english.

Owner of an Olimex pinguino Otg board and an Itdb02 3.2 TFT I am intersted in using them with th pinguino.

This diplay with UTFT works on ChipKit Uno and Max.

I am wondering if some one tried to mount a TFT to th pinguino and what should be th wiring?


RE: TFT touch screen - regis - 13-04-2013

Hi,
Take a look at examples/07.Display/ITDB02 ...


RE: TFT touch screen - jacquot - 14-04-2013

Hi Regis

Thank you for your reply.
I saw this lib and exemples, and I used it with arduino

In the header from the Lib I found written by Marcus Fazzi that port D have 16bit but pinguino OTG from Olimex, port D only 12bit are wired.

To be more clear in my asking, how have I to Wire my Itead 3.2" touch TFT


RE: TFT touch screen - regis - 14-04-2013

Looking at the code, it seems Marcus has used these pins :

DATA PORTD are pins 0 to 7 = D0 to D7
LCD_RS PORTDbits.RD10 is pin 19 = A5
LCD_WR PORTDbits.RD9 is pin 18 = A4
LCD_CS PORTBbits.RB4 is pin 17 = A3
LCD_REST PORTBbits.RB3 is pin 16 = A2

Tell me if it works so.

(14-04-2013, 06:21 PM)jacquot Wrote: Hi Regis

Thank you for your reply.
I saw this lib and exemples, and I used it with arduino

In the header from the Lib I found written by Marcus Fazzi that port D have 16bit but pinguino OTG from Olimex, port D only 12bit are wired.

To be more clear in my asking, how have I to Wire my Itead 3.2" touch TFT



RE: TFT touch screen - jacquot - 14-04-2013

Thanks
I will tri thast is in 8 bit mode. Not sure if my display 16bit will work


(14-04-2013, 08:58 PM)regis Wrote: Looking at the code, it seems Marcus has used these pins :

DATA PORTD are pins 0 to 7 = D0 to D7
LCD_RS PORTDbits.RD10 is pin 19 = A5
LCD_WR PORTDbits.RD9 is pin 18 = A4
LCD_CS PORTBbits.RB4 is pin 17 = A3
LCD_REST PORTBbits.RB3 is pin 16 = A2

Tell me if it works so.

(14-04-2013, 06:21 PM)jacquot Wrote: Hi Regis

Thank you for your reply.
I saw this lib and exemples, and I used it with arduino

In the header from the Lib I found written by Marcus Fazzi that port D have 16bit but pinguino OTG from Olimex, port D only 12bit are wired.

To be more clear in my asking, how have I to Wire my Itead 3.2" touch TFT