Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pinguino 18F2550 and bootloader v4.8 : run led ?
18-04-2013, 02:23 PM, (This post was last modified: 18-04-2013, 05:10 PM by dadwarf.)
#13
RE: Pinguino 18F2550 and bootloader v4.8 : run led ?
(18-04-2013, 12:06 PM)Pinguino Wrote:
(18-04-2013, 10:38 AM)dadwarf Wrote: because on my OSX it still doesn't upload (and in r765 sdcpp is missing) ...

Just to clarify: OS X 8 bit sdcpp is not missing - it is not used and so was removed.

Probably but It won't compile if it is not present !

Quote:OSX :

/Users/sdcc-builder/build/sdcc-build/orig/sdcc/src/pic16/main.c:670 setting interrupt vector addresses 0xc00
sh: sdcpp: command not found
at 1: warning 190: ISO C forbids an empty source file
Processor: 18f2550
sdcc: Calling preprocessor...
sdcc: Generating code...

Windows (sdcpp.exe is present but i need to add bin path to $PATH):

'sdcpp' n'est pas reconnu en tant que commande interne
ou externe, un programme ex‚cutable ou un fichier de commandes.
Processor: 18f2550
sdcc: Calling preprocessor...
sdcc: Generating code...
/dvpt/sdcc/sources/sdcc/src/pic16/main.c:686 setting interrupt vector addresses 0xc00
at 1: warning 190: ISO C forbids an empty source file

About OSX I have a question : when i connect my Pinguino 18F2550 v4.8 to a Windows (8) or a Linux (squeeze), if it is in bootloader mode the run led (user led) blinks. But when I connect it to my OSX (10.8 Mountain Lion) it didn't blink ! that's probably why I can't upload : do I need to install a drivers ? The Pinguino is in listed in the system report. But IDE acts like there is nothing connected !

Quote:Pinguino:
Product ID: 0xfeaa
Vendor ID: 0x04d8 (Microchip Technology Inc.)
Version: 4,08
Speed: Up to 12 Mb/sec
Manufacturer: R.Blanchot
Reply


Messages In This Thread
RE: Pinguino 18F2550 and bootloader v4.8 : run led ? - by dadwarf - 18-04-2013, 02:23 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)