Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Olimex PIC32-T795 support
21-09-2016, 04:38 PM,
#49
RE: Olimex PIC32-T795 support
(20-09-2016, 08:35 PM)Hershell Wrote: So the Pinguino is using "HID bootloader" here?
What should be the power consumption of pic32MX795F512H in idle in that t795 configuration?
All Pinguino 32 use HID bootloader. Pinguino 32MX2x0 use a Pinguino version, the rest use a Microchip version.
I chose to stick to a Bulk version for Pinguino 8 because of the RAM/Flash size. However there is a HID version of the Pinguino bootloader for them too.
You'll find info. about consumption in idle state in the datasheet of the PIC32MX795. It also depends on how Olimex build this board. Please contact them for more information.
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply


Messages In This Thread
Olimex PIC32-T795 support - by imrehg - 02-10-2012, 06:34 AM
RE: Olimex PIC32-T795 support - by regis - 02-10-2012, 10:17 AM
RE: Olimex PIC32-T795 support - by imrehg - 02-10-2012, 10:19 AM
RE: Olimex PIC32-T795 support - by regis - 02-10-2012, 12:42 PM
RE: Olimex PIC32-T795 support - by imrehg - 02-10-2012, 04:50 PM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 09:20 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 10:16 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 10:28 AM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 10:34 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 11:09 AM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 12:15 PM
RE: Olimex PIC32-T795 support - by pingotg - 03-10-2012, 11:25 AM
RE: Olimex PIC32-T795 support - by pingotg - 03-10-2012, 07:07 PM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 03:26 AM
RE: Olimex PIC32-T795 support - by schumi - 04-10-2012, 07:30 AM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 11:46 AM
RE: Olimex PIC32-T795 support - by schumi - 04-10-2012, 01:47 PM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 05:20 PM
RE: Olimex PIC32-T795 support - by pingotg - 04-10-2012, 12:17 PM
RE: Olimex PIC32-T795 support - by schumi - 16-10-2012, 03:38 PM
RE: Olimex PIC32-T795 support - by imrehg - 19-10-2012, 05:33 AM
RE: Olimex PIC32-T795 support - by ringo125 - 31-03-2013, 08:20 PM
RE: Olimex PIC32-T795 support - by pingotg - 01-04-2013, 09:59 AM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 10:21 AM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 06:23 PM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 07:30 PM
RE: Olimex PIC32-T795 support - by ringo125 - 02-04-2013, 09:03 PM
RE: Olimex PIC32-T795 support - by ringo125 - 30-04-2013, 11:34 AM
RE: Olimex PIC32-T795 support - by regis - 01-05-2013, 09:04 AM
RE: Olimex PIC32-T795 support - by ringo125 - 02-05-2013, 11:13 AM
RE: Olimex PIC32-T795 support - by regis - 02-05-2013, 11:35 AM
RE: Olimex PIC32-T795 support - by ringo125 - 11-05-2013, 11:38 AM
RE: Olimex PIC32-T795 support - by ANTONi - 16-09-2013, 10:35 PM
RE: Olimex PIC32-T795 support - by pinguPlus - 16-09-2013, 11:04 PM
RE: Olimex PIC32-T795 support - by ANTONi - 16-09-2013, 11:40 PM
RE: Olimex PIC32-T795 support - by pingotg - 17-09-2013, 12:59 AM
RE: Olimex PIC32-T795 support - by regis - 19-09-2013, 09:20 AM
RE: Olimex PIC32-T795 support - by regis - 19-09-2013, 10:00 AM
RE: Olimex PIC32-T795 support - by ANTONi - 19-09-2013, 12:00 PM
RE: Olimex PIC32-T795 support - by LubOlimex - 19-09-2013, 04:01 PM
RE: Olimex PIC32-T795 support - by ANTONi - 19-09-2013, 11:12 PM
RE: Olimex PIC32-T795 support - by LubOlimex - 20-09-2013, 02:34 PM
RE: Olimex PIC32-T795 support - by Pinguino - 24-09-2013, 08:50 AM
RE: Olimex PIC32-T795 support - by Hershell - 19-09-2016, 05:30 PM
RE: Olimex PIC32-T795 support - by regis - 19-09-2016, 05:37 PM
RE: Olimex PIC32-T795 support - by Hershell - 19-09-2016, 09:44 PM
RE: Olimex PIC32-T795 support - by regis - 20-09-2016, 09:26 AM
RE: Olimex PIC32-T795 support - by Hershell - 20-09-2016, 08:35 PM
RE: Olimex PIC32-T795 support - by regis - 21-09-2016, 04:38 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)