Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Olimex PIC32-T795 support
03-10-2012, 11:25 AM, (This post was last modified: 03-10-2012, 11:26 AM by pingotg.)
#11
RE: Olimex PIC32-T795 support
Sounds like you're going the right sort of direction.

For debug I found CDC.printf more useful than serial. I just connect using a terminal emulator such as "screen" via the same USB cable used for downloading the hex.

I have a PIC32-Pinguino OTG and its board has legend (silkscreen) with D0 (and lots of others) so that was chosen as PIN 0 and is thus the first entry in each of those arrays in digitalw.c (from which you can also see it is port D bit 2 i.e. RD2).

Just choose settings that make sense.

There's a really good Xref PDF for my kind of board in the wiki which you might find useful to see what another board did, if you get stuck.

John
Reply


Messages In This Thread
Olimex PIC32-T795 support - by imrehg - 02-10-2012, 06:34 AM
RE: Olimex PIC32-T795 support - by regis - 02-10-2012, 10:17 AM
RE: Olimex PIC32-T795 support - by imrehg - 02-10-2012, 10:19 AM
RE: Olimex PIC32-T795 support - by regis - 02-10-2012, 12:42 PM
RE: Olimex PIC32-T795 support - by imrehg - 02-10-2012, 04:50 PM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 09:20 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 10:16 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 10:28 AM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 10:34 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 11:09 AM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 12:15 PM
RE: Olimex PIC32-T795 support - by pingotg - 03-10-2012, 11:25 AM
RE: Olimex PIC32-T795 support - by pingotg - 03-10-2012, 07:07 PM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 03:26 AM
RE: Olimex PIC32-T795 support - by schumi - 04-10-2012, 07:30 AM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 11:46 AM
RE: Olimex PIC32-T795 support - by schumi - 04-10-2012, 01:47 PM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 05:20 PM
RE: Olimex PIC32-T795 support - by pingotg - 04-10-2012, 12:17 PM
RE: Olimex PIC32-T795 support - by schumi - 16-10-2012, 03:38 PM
RE: Olimex PIC32-T795 support - by imrehg - 19-10-2012, 05:33 AM
RE: Olimex PIC32-T795 support - by ringo125 - 31-03-2013, 08:20 PM
RE: Olimex PIC32-T795 support - by pingotg - 01-04-2013, 09:59 AM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 10:21 AM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 06:23 PM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 07:30 PM
RE: Olimex PIC32-T795 support - by ringo125 - 02-04-2013, 09:03 PM
RE: Olimex PIC32-T795 support - by ringo125 - 30-04-2013, 11:34 AM
RE: Olimex PIC32-T795 support - by regis - 01-05-2013, 09:04 AM
RE: Olimex PIC32-T795 support - by ringo125 - 02-05-2013, 11:13 AM
RE: Olimex PIC32-T795 support - by regis - 02-05-2013, 11:35 AM
RE: Olimex PIC32-T795 support - by ringo125 - 11-05-2013, 11:38 AM
RE: Olimex PIC32-T795 support - by ANTONi - 16-09-2013, 10:35 PM
RE: Olimex PIC32-T795 support - by pinguPlus - 16-09-2013, 11:04 PM
RE: Olimex PIC32-T795 support - by ANTONi - 16-09-2013, 11:40 PM
RE: Olimex PIC32-T795 support - by pingotg - 17-09-2013, 12:59 AM
RE: Olimex PIC32-T795 support - by regis - 19-09-2013, 09:20 AM
RE: Olimex PIC32-T795 support - by regis - 19-09-2013, 10:00 AM
RE: Olimex PIC32-T795 support - by ANTONi - 19-09-2013, 12:00 PM
RE: Olimex PIC32-T795 support - by LubOlimex - 19-09-2013, 04:01 PM
RE: Olimex PIC32-T795 support - by ANTONi - 19-09-2013, 11:12 PM
RE: Olimex PIC32-T795 support - by LubOlimex - 20-09-2013, 02:34 PM
RE: Olimex PIC32-T795 support - by Pinguino - 24-09-2013, 08:50 AM
RE: Olimex PIC32-T795 support - by Hershell - 19-09-2016, 05:30 PM
RE: Olimex PIC32-T795 support - by regis - 19-09-2016, 05:37 PM
RE: Olimex PIC32-T795 support - by Hershell - 19-09-2016, 09:44 PM
RE: Olimex PIC32-T795 support - by regis - 20-09-2016, 09:26 AM
RE: Olimex PIC32-T795 support - by Hershell - 20-09-2016, 08:35 PM
RE: Olimex PIC32-T795 support - by regis - 21-09-2016, 04:38 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)