Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Olimex PIC32-T795 support
19-09-2013, 04:01 PM, (This post was last modified: 19-09-2013, 04:01 PM by LubOlimex.)
#40
RE: Olimex PIC32-T795 support
(19-09-2013, 12:00 PM)ANTONi Wrote: Hello,
so just programmed my OLIMEX PIC32-T795 whith the recommend file you linked. But this is still the same Software I found in the net and shows up with the (LED and SWITCH) faults I discribed above.

It has also the name UBW32.... .hex. Isn´t that the Bootloader for the UBW32 Board form Schmalzhaus?

I also wrote to info.OLIMEX.com to get an actuell PINGUINO-Bloader for the T795 board(with correct LED and SWITCH pinning), but till now there is now answer....Huh

Perhaps member OLIMEX here in the FORUM has an answer?

regards
Toni

Hey there,

The bootloader is the one regis posted and the one you originally downloaded BUT you missed one point (which probably wasn't made very clear in the manual). The point is regarding the RD8/RD0 pin on the back of the board. Quoting page 17 of the UM:

"RD8/RD0 - Changes the default boot pin. If RD8 is selected starts with Duinomite bootloader. If RD0 is selected Pinguino bootloader. The difference between the two bootloaders is the processor pin used for the button. Duinomite bootloader may be found at the Duinomite repository and Pinguino bootloader may be found in the Pinguino IDE folders."

TL: DR - You need to change the position of the SMT jumper RD8/RD0 = cut between the RD8 pads and solder the RD0 pads. Then you need to upload the bootloader from the Pinguino folders. Then you need to enter bootloader mode by holding button BUT and resetting the board.

Best regards,
Lub/OLIMEX
Reply


Messages In This Thread
Olimex PIC32-T795 support - by imrehg - 02-10-2012, 06:34 AM
RE: Olimex PIC32-T795 support - by regis - 02-10-2012, 10:17 AM
RE: Olimex PIC32-T795 support - by imrehg - 02-10-2012, 10:19 AM
RE: Olimex PIC32-T795 support - by regis - 02-10-2012, 12:42 PM
RE: Olimex PIC32-T795 support - by imrehg - 02-10-2012, 04:50 PM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 09:20 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 10:16 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 10:28 AM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 10:34 AM
RE: Olimex PIC32-T795 support - by regis - 03-10-2012, 11:09 AM
RE: Olimex PIC32-T795 support - by imrehg - 03-10-2012, 12:15 PM
RE: Olimex PIC32-T795 support - by pingotg - 03-10-2012, 11:25 AM
RE: Olimex PIC32-T795 support - by pingotg - 03-10-2012, 07:07 PM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 03:26 AM
RE: Olimex PIC32-T795 support - by schumi - 04-10-2012, 07:30 AM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 11:46 AM
RE: Olimex PIC32-T795 support - by schumi - 04-10-2012, 01:47 PM
RE: Olimex PIC32-T795 support - by imrehg - 04-10-2012, 05:20 PM
RE: Olimex PIC32-T795 support - by pingotg - 04-10-2012, 12:17 PM
RE: Olimex PIC32-T795 support - by schumi - 16-10-2012, 03:38 PM
RE: Olimex PIC32-T795 support - by imrehg - 19-10-2012, 05:33 AM
RE: Olimex PIC32-T795 support - by ringo125 - 31-03-2013, 08:20 PM
RE: Olimex PIC32-T795 support - by pingotg - 01-04-2013, 09:59 AM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 10:21 AM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 06:23 PM
RE: Olimex PIC32-T795 support - by ringo125 - 01-04-2013, 07:30 PM
RE: Olimex PIC32-T795 support - by ringo125 - 02-04-2013, 09:03 PM
RE: Olimex PIC32-T795 support - by ringo125 - 30-04-2013, 11:34 AM
RE: Olimex PIC32-T795 support - by regis - 01-05-2013, 09:04 AM
RE: Olimex PIC32-T795 support - by ringo125 - 02-05-2013, 11:13 AM
RE: Olimex PIC32-T795 support - by regis - 02-05-2013, 11:35 AM
RE: Olimex PIC32-T795 support - by ringo125 - 11-05-2013, 11:38 AM
RE: Olimex PIC32-T795 support - by ANTONi - 16-09-2013, 10:35 PM
RE: Olimex PIC32-T795 support - by pinguPlus - 16-09-2013, 11:04 PM
RE: Olimex PIC32-T795 support - by ANTONi - 16-09-2013, 11:40 PM
RE: Olimex PIC32-T795 support - by pingotg - 17-09-2013, 12:59 AM
RE: Olimex PIC32-T795 support - by regis - 19-09-2013, 09:20 AM
RE: Olimex PIC32-T795 support - by regis - 19-09-2013, 10:00 AM
RE: Olimex PIC32-T795 support - by ANTONi - 19-09-2013, 12:00 PM
RE: Olimex PIC32-T795 support - by LubOlimex - 19-09-2013, 04:01 PM
RE: Olimex PIC32-T795 support - by ANTONi - 19-09-2013, 11:12 PM
RE: Olimex PIC32-T795 support - by LubOlimex - 20-09-2013, 02:34 PM
RE: Olimex PIC32-T795 support - by Pinguino - 24-09-2013, 08:50 AM
RE: Olimex PIC32-T795 support - by Hershell - 19-09-2016, 05:30 PM
RE: Olimex PIC32-T795 support - by regis - 19-09-2016, 05:37 PM
RE: Olimex PIC32-T795 support - by Hershell - 19-09-2016, 09:44 PM
RE: Olimex PIC32-T795 support - by regis - 20-09-2016, 09:26 AM
RE: Olimex PIC32-T795 support - by Hershell - 20-09-2016, 08:35 PM
RE: Olimex PIC32-T795 support - by regis - 21-09-2016, 04:38 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)