Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upload won't work, but shows error only when pinguino disconected
25-08-2014, 09:42 AM,
#41
RE: Upload won't work, but shows error only when pinguino disconected
@daniel, @derf158 :
So now it works fine for both of you ?
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply
25-08-2014, 10:46 AM,
#42
RE: Upload won't work, but shows error only when pinguino disconected
(25-08-2014, 09:42 AM)regis Wrote: @daniel, @derf158 :
So now it works fine for both of you ?

Regis
The IDE works for me but as I stated the ir library has an issue.
Fred
Reply
25-08-2014, 11:53 AM,
#43
RE: Upload won't work, but shows error only when pinguino disconected
Ok, this was just not the subject of this thread ;-)
Please report this bug to the right thread or better, use the Gihub issue tracker : https://github.com/PinguinoIDE/pinguino-...ies/issues and assign it to me.
Thank you.

(25-08-2014, 10:46 AM)derf158 Wrote: The IDE works for me but as I stated the ir library has an issue.
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply
25-08-2014, 11:00 PM,
#44
RE: Upload won't work, but shows error only when pinguino disconected
(25-08-2014, 09:42 AM)regis Wrote: @daniel, @derf158 :
So now it works fine for both of you ?

Regis, USB problem is solved. It works now without need to get su priviliges. What is exactly you did? I have same problem with accessing serial port from other app.

I have to mention that with this version I have problems with intellisense, it crashes IDE usually after every second char. Maybie it is something Lubuntu related, I don't know. dmesg says it is python and gives just processor registers content.

Other than that, I'm not sure if it is the way it should with installing libstdc from external ppa.
Reply
26-08-2014, 09:15 AM,
#45
RE: Upload won't work, but shows error only when pinguino disconected
Quote:What is exactly you did? I have same problem with accessing serial port from other app.
Bad use of $USER in my package script. $USER was replaced by root.
I also add : chmod -R 777 /dev/bus/usb/

Quote:I have to mention that with this version I have problems with intellisense, it crashes IDE usually after every second char. Maybie it is something Lubuntu related, I don't know. dmesg says it is python and gives just processor registers content.

Please use the Gihub issue tracker to report this bug : https://github.com/PinguinoIDE/pinguino-ide/issues and assign it to Yeison.

Quote:Other than that, I'm not sure if it is the way it should with installing libstdc from external ppa.
I built sdcc with gcc/g++ 4.9.1 and this is surely the problem as sdcc ask for a newer libstdc version.
There are several options :
1/ Compile sdcc with an older version
2/ Ask users to update their gcc version to 4.9.1
3/ Add a new dependency to gcc 4.9 when I build the package
I just don't know if 4.9 is available for any distro ...
I will try solution 1/ ...

Can you officially report this as a bug : https://github.com/PinguinoIDE/pinguino-ide/issues and assign it to me ?
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply
26-08-2014, 11:39 AM, (This post was last modified: 26-08-2014, 11:47 AM by gtcbreizh.)
#46
RE: Upload won't work, but shows error only when pinguino disconected
Compiling in 8bits with the last installation/installer.sh I got the problem GLIBCXX_3.4.20 not found too.
I verified g++-4.9 was not installed.
I solved the problem by updating my Linux Mint version 17 :
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install g++-4.9

Now compiling and uploading work. Tested with 18f2550 and 18f26j50.

I tested on a 32MX250F128B. It works too but notice there is no message saying compiling was successful.

André
Reply
27-08-2014, 06:26 PM,
#47
RE: Upload won't work, but shows error only when pinguino disconected
(26-08-2014, 09:15 AM)regis Wrote: Can you officially report this as a bug : https://github.com/PinguinoIDE/pinguino-ide/issues and assign it to me ?

I just did that, unfortunately there is no "regis" to assign :-)
https://github.com/PinguinoIDE/pinguino-ide/issues/20
Reply
28-08-2014, 09:02 AM,
#48
RE: Upload won't work, but shows error only when pinguino disconected
Thank you.
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)