Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Accessing registers/interrupts
30-05-2015, 12:31 PM,
#17
RE: Accessing registers/interrupts
Thx, Regis. Unfortunately, issue 1 still exists after deleting the line you mentioned. Is there a possibilty to prevent the deleting of the temporary file ccspqKZc.s on my side? Then I could upload the file and maybe it shows what is going wrong.

Regarding issue 2 it is not an error message. I played it a bit around and found out, that the PIC prints the correct address when using

Code:
CDC.printf("Pic address: 0x%X \r\n", I2C2ADD);

But when I use i2cdetect on raspi side it shows me still 0x03 instead of 0x0E and the most confusing thing is, that the PIC is really responding on 0x03. Maybe raspi handels the address different, but why it should do that?
Reply


Messages In This Thread
Accessing registers/interrupts - by Dobby_ - 29-03-2015, 04:10 PM
RE: Accessing registers/interrupts - by pingotg - 29-03-2015, 09:20 PM
RE: Accessing registers/interrupts - by Dobby_ - 30-03-2015, 07:44 PM
RE: Accessing registers/interrupts - by pingotg - 31-03-2015, 05:03 PM
RE: Accessing registers/interrupts - by moreno - 31-03-2015, 06:11 PM
RE: Accessing registers/interrupts - by Dobby_ - 31-03-2015, 08:15 PM
RE: Accessing registers/interrupts - by moreno - 31-03-2015, 09:33 PM
RE: Accessing registers/interrupts - by joel - 01-04-2015, 06:54 PM
RE: Accessing registers/interrupts - by Dobby_ - 01-04-2015, 10:03 PM
RE: Accessing registers/interrupts - by Dobby_ - 01-04-2015, 08:57 PM
RE: Accessing registers/interrupts - by joel - 02-04-2015, 10:42 AM
RE: Accessing registers/interrupts - by Dobby_ - 02-04-2015, 09:22 PM
RE: Accessing registers/interrupts - by pingotg - 02-04-2015, 10:15 PM
RE: Accessing registers/interrupts - by Dobby_ - 07-04-2015, 10:09 PM
RE: Accessing registers/interrupts - by Dobby_ - 25-05-2015, 11:38 AM
RE: Accessing registers/interrupts - by regis - 28-05-2015, 09:42 AM
RE: Accessing registers/interrupts - by Dobby_ - 30-05-2015, 12:31 PM
RE: Accessing registers/interrupts - by regis - 01-06-2015, 12:40 PM
RE: Accessing registers/interrupts - by Dobby_ - 04-06-2015, 08:42 AM
RE: Accessing registers/interrupts - by regis - 04-06-2015, 11:30 AM
RE: Accessing registers/interrupts - by Dobby_ - 04-06-2015, 06:09 PM
RE: Accessing registers/interrupts - by regis - 08-06-2015, 12:31 PM
RE: Accessing registers/interrupts - by Dobby_ - 13-06-2015, 05:55 PM
RE: Accessing registers/interrupts - by regis - 13-06-2015, 06:15 PM
RE: Accessing registers/interrupts - by Dobby_ - 13-06-2015, 09:59 PM
RE: Accessing registers/interrupts - by fpeixeiro - 29-09-2016, 04:31 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)