Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Accessing registers/interrupts
13-06-2015, 06:15 PM,
#24
RE: Accessing registers/interrupts
(13-06-2015, 05:55 PM)Dobby_ Wrote: Unfortunately, I have no serial port at my laptop, only a DVI, HDMI and several USB ports. When I would try to use a USB to RS-232 / TTL Cable together with the ICSP interface and putty or realterm. Would this work together with the serial library?

You need to connect your USB to RS-232 / TTL Cable to your PC (USB connector) and to one of the Serial port of your Pinguino (RX, TX pins). You can use ICSP along as long as ICSP and Serial don't share the same pins.
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply


Messages In This Thread
Accessing registers/interrupts - by Dobby_ - 29-03-2015, 04:10 PM
RE: Accessing registers/interrupts - by pingotg - 29-03-2015, 09:20 PM
RE: Accessing registers/interrupts - by Dobby_ - 30-03-2015, 07:44 PM
RE: Accessing registers/interrupts - by pingotg - 31-03-2015, 05:03 PM
RE: Accessing registers/interrupts - by moreno - 31-03-2015, 06:11 PM
RE: Accessing registers/interrupts - by Dobby_ - 31-03-2015, 08:15 PM
RE: Accessing registers/interrupts - by moreno - 31-03-2015, 09:33 PM
RE: Accessing registers/interrupts - by joel - 01-04-2015, 06:54 PM
RE: Accessing registers/interrupts - by Dobby_ - 01-04-2015, 10:03 PM
RE: Accessing registers/interrupts - by Dobby_ - 01-04-2015, 08:57 PM
RE: Accessing registers/interrupts - by joel - 02-04-2015, 10:42 AM
RE: Accessing registers/interrupts - by Dobby_ - 02-04-2015, 09:22 PM
RE: Accessing registers/interrupts - by pingotg - 02-04-2015, 10:15 PM
RE: Accessing registers/interrupts - by Dobby_ - 07-04-2015, 10:09 PM
RE: Accessing registers/interrupts - by Dobby_ - 25-05-2015, 11:38 AM
RE: Accessing registers/interrupts - by regis - 28-05-2015, 09:42 AM
RE: Accessing registers/interrupts - by Dobby_ - 30-05-2015, 12:31 PM
RE: Accessing registers/interrupts - by regis - 01-06-2015, 12:40 PM
RE: Accessing registers/interrupts - by Dobby_ - 04-06-2015, 08:42 AM
RE: Accessing registers/interrupts - by regis - 04-06-2015, 11:30 AM
RE: Accessing registers/interrupts - by Dobby_ - 04-06-2015, 06:09 PM
RE: Accessing registers/interrupts - by regis - 08-06-2015, 12:31 PM
RE: Accessing registers/interrupts - by Dobby_ - 13-06-2015, 05:55 PM
RE: Accessing registers/interrupts - by regis - 13-06-2015, 06:15 PM
RE: Accessing registers/interrupts - by Dobby_ - 13-06-2015, 09:59 PM
RE: Accessing registers/interrupts - by fpeixeiro - 29-09-2016, 04:31 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)