Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Windows 11.0-beta.3 is showing "Upload done" even when it is not done
02-10-2015, 10:13 PM, (This post was last modified: 02-10-2015, 10:13 PM by B4lfiz4r.)
#1
Windows 11.0-beta.3 is showing "Upload done" even when it is not done
Hey
The issue is simple.
After uploading a bootloader there is a popup: "Upload done", "File successfully uploaded to Pinguino."
But I just found out that this is showing no matter what's the result of upload!
EXAMPLE:
1. connect PINGUINO 26J50
2. select Blink example
3. select board 4550 (yes, this is intentional mistake)
4. reset it and press upload.
The log says:
Code:
[OUT] Compiling: C:\pinguino-11\user\examples.Analog\AnalogInput\AnalogInput.pde
[OUT] Board: Pinguino 4550
[OUT] Proc: 18f4550
[OUT] Arch: 8
[OUT] Bootloader: v4
[DEBUG] Starting 'verify' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Starting 'preprocess' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Starting 'remove_comments' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Time spent for 'remove_comments': 0.00 s
[DEBUG] Ending 'remove_comments'
[DEBUG] Starting 'remove_comments' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Time spent for 'remove_comments': 0.00 s
[DEBUG] Ending 'remove_comments'
[DEBUG] Starting 'get_regobject_libinstructions' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Time spent for 'get_regobject_libinstructions': 0.00 s
[DEBUG] Ending 'get_regobject_libinstructions'
[DEBUG] Starting 'replace_word' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Time spent for 'replace_word': 0.02 s
[DEBUG] Ending 'replace_word'
[DEBUG] Time spent for 'preprocess': 0.06 s
[DEBUG] Ending 'preprocess'
[DEBUG] Starting 'compile' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Time spent for 'compile': 0.19 s
[DEBUG] Ending 'compile'
[DEBUG] Starting 'link' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Time spent for 'link': 0.07 s
[DEBUG] Ending 'link'
[DEBUG] Time spent for 'verify': 0.36 s
[DEBUG] Ending 'verify'
[OUT] compilation done
[OUT] Code size: 3956 / 29696 bytes (13% used)
[OUT] 0.355 seconds process time
[DEBUG] Starting '__upload__' from 'qtgui.pinguino_api.pinguino_tools'
[DEBUG] Starting 'upload' from 'qtgui.pinguino_api.uploader.uploader'
[DEBUG] Looking for a Pinguino device ...
[DEBUG] Found device 0x04D8:0xFEAA
[DEBUG] Pinguino found ...
[DEBUG] OS is windows
[DEBUG] Configuration set
[DEBUG] Interface claimed
[DEBUG] Everything OK so far
[DEBUG]  - with PIC18f26j50 (id=4C40)
[DEBUG] Aborting: program compiled for 18f4550 but device has 18f26j50
[DEBUG] Device closed
[DEBUG] Time spent for 'upload': 0.03 s
[DEBUG] Ending 'upload'
[DEBUG] Time spent for '__upload__': 0.04 s
[DEBUG] Ending '__upload__'
[OUT] Pinguino found ...
[OUT]  - with PIC18f26j50 (id=4C40)
[OUT] Aborting: program compiled for 18f4550 but device has 18f26j50
>>>

BUT THE "Upload done.", "File successfully uploaded to Pinguino." is showed anyway!

This is confusing and this message should NOT show up if wrong board was chosen.
This might confuse people who don't read the log console output.
Reply
08-10-2015, 06:32 PM,
#2
RE: Windows 11.0-beta.3 is showing "Upload done" even when it is not done
It's better to report issues on github so we can track them. Thank you.
It is easier to complain than it is to do, but it is better to do than it is to complain.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)