Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pinguino IDE and Windows 10 install problems
23-06-2016, 08:47 PM,
#1
Pinguino IDE and Windows 10 install problems
I have recently changed from Win 7 to Win 10. When running the Pinguino IDE installed about a year ago, compiling was not possible anymore. Problems with linking. Reinstalling did not help.

Yesterday I uninstalled this IDE version and installed the present version for PIC32MX. I have ( a number of times ) tried installing both V11 and V12. Both aborts at the same place when installing and says the same:

Wheel not installed !
Error code was: error !

I am using a Toshiba Satellite laptop.

Any suggestions ?
Reply
05-07-2016, 07:12 PM, (This post was last modified: 06-07-2016, 06:48 PM by walk_porto.)
#2
RE: Pinguino IDE and Windows 10 install problems
Hello,

I had some difficulties to install Pinguino IDE on my PC (Windows 10). So, I installed this IDE : http://wiki.pinguino.cc/index.php/Catego..._Downloads
And now I can compile and upload some programs.

You can refer to this thread, it is well explicated : http://forum.pinguino.cc/showthread.php?tid=4352


[url=Hello,  I had some difficulties to install Pinguino IDE on my PC (Windows 10). So, I installed this IDE : http://wiki.pinguino.cc/index.php/Catego..._Downloads And now I can compile and upload some programs.  You can refer to this thread, it is well explicated :][/url]
Reply
08-07-2016, 09:08 AM,
#3
RE: Pinguino IDE and Windows 10 install problems
Thanks a lot for the information. I have not tried it yet.

But,I have just tried the new version 1.7.0.10, but no, it did not work, not version 11 and not 12. Different error codes comes for every install ! 708, 852 and so on...........

There is just too much fiddling around with different files for the Pinguino.

Among other things I just cannot understand why the installer always says: "Python 2.7 is not installed" when it already has been installed on the earlier installing goaround ?????

It is now time to let the Pinguino board go to electronic recycling.........
Reply
08-07-2016, 11:38 AM,
#4
RE: Pinguino IDE and Windows 10 install problems
I suggest you to install the version I told u before, you will be able to use again your Pinguino board.
I know it's not easy when it doesn't work but we are a community and we have to help each other.
The link to download the version : http://wiki.pinguino.cc/index.php/Catego..._Downloads
[url=http://wiki.pinguino.cc/index.php/Category:IDE_Downloads][/url]
Reply
09-07-2016, 07:37 PM,
#5
RE: Pinguino IDE and Windows 10 install problems
Now I have tried your suggestion but no it does not work unfortunately. (Using the drivers for Win 7 as none is to be found for Win 10)

- When selecting the correct device (PIC32 Pinguino OTG) compiling does not work (linking error).
- When instead selecting PIC32 Pinguino MX220 (or Pinguino MICRO) compiling is OK but the device is not found.

When installing the drivers it says this driver is known NOT to work with Windows, besides Bootloader mode does not work anymore (no alternate blinking green/orange). Going back to the original driver and bootloader mode works again.
So it seems to know that something is at the end of the cable anyway but does not talk with it.

One more test (the very very final) with 1.7.0.10 says (as usual) that Python 2.7 is not installed (but it is !). When coming to the installing process of Python now it says that Python is installed.........
Finally the whole installation stops just before the bat file is to be installed and the error is error !

Lovely.........

Regards !
Reply
31-08-2016, 11:30 AM,
#6
RE: Pinguino IDE and Windows 10 install problems
I tried the v1.7.0.10 with the latest updates in a Win 10 PC.

Tried installing v11 with GCC for 32MX selected.

Everything goes fine until it finally says "post_install.py" not installed. (But it is there !)

Having tried this a number of times and the error codes coming are never the same, among others: 728,

756,812,1016.......

Anyone having any hints ?

Regards,

Urban
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)